crawler rock drill

To practice spiral foraging effectively, it is crucial to have a solid understanding of local flora and fauna. Foragers should familiarize themselves with the edible plants in their region, as well as any potential lookalikes that could be harmful if consumed. Identification skills can be honed through field guides or by joining local foraging groups where experienced foragers can share their knowledge. This learning journey not only enriches the foraging experience but also fosters a sense of community among those who share a passion for sustainable practices.


...


Second, the use and characteristics of the drilling rig:
1). Use:
Engineering anchoring drill can be used in urban construction, railway, highway, river, hydropower and other projects to drill rock anchor hole, anchor hole, blasting hole, grouting hole and other drilling construction.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.

...


(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.

...

  • 1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.
  • ...