hole hammer drilling
When the wind force is greater than level 6 during operation, the pile driver should stop the operation, and the oil cylinder should be used as an auxiliary support. If necessary, a wind rope should be added for fixing.When the crawler is piled, avoid the collision between the drill pipe reinforcement cage and other columns.
.
Problem: Mine slurry pump does not water, pressure gauge and true empty meter pointer beat violently.
Die Rohstoffpreise sind ebenfalls ein bedeutender Faktor, der die Herstellungskosten beeinflusst. Schwankungen bei den Preisen für Stahl und andere Materialien können die Rentabilität der Hersteller beeinträchtigen.
Máy nén khí di động diesel được sử dụng rộng rãi trong nhiều lĩnh vực khác nhau, bao gồm
(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
In summary, choosing the right pump for slurry applications is crucial to ensure efficient operation and minimize operational costs. Centrifugal and positive displacement pumps each have their distinct advantages, depending on the specific needs of the slurry being handled. By considering the properties of the slurry, pump material, required flow rates, operating conditions, and maintenance needs, industries can optimize their slurry handling processes for better performance and longevity. Ultimately, the right pump selection can lead to increased productivity and reduced wear and tear in industrial operations.
