Applications
...
2025-08-14 07:02
415
compresor de aire de tornillo diesel
Due to the machine's working environment being prone to intense vibrations and impacts, constantly observe the dynamics of various parts during operation. If you detect abnormal noise or other irregularities, shut down the machine immediately for inspection and repair before resuming operation. If hydraulic system connectors leak or components become loose, shut down the machine for adjustment and tightening. After ensuring everything is normal, you can resume operation. Before completing each shift, lower the hydraulic hammer to the lowest position and retract all other hydraulic cylinders to their shortest length. If moving a distance, keep the mast leaning backward. For the machine's components, accessories, and electrical equipment, perform regular inspections, especially the connections in the wiring of the motor. During operation, there should be designated personnel for guidance. The guide and the operator should check signals with each other before work and cooperate closely. At the start, use a bell or other methods to signal and inform surrounding personnel to move away. The machine should start at a low speed and gradually accelerate to high speed.
...
2025-08-14 06:53
1332
Second, the use and characteristics of the drilling rig:
1). Use:
Engineering anchoring drill can be used in urban construction, railway, highway, river, hydropower and other projects to drill rock anchor hole, anchor hole, blasting hole, grouting hole and other drilling construction.
Second, the use and characteristics of the drilling rig:
1). Use:
Engineering anchoring drill can be used in urban construction, railway, highway, river, hydropower and other projects to drill rock anchor hole, anchor hole, blasting hole, grouting hole and other drilling construction.
...
2025-08-14 06:43
2966
The Slurry Pump Blade Factory Engineering Efficiency and Innovation
...
2025-08-14 06:36
934
Understanding Bullet Teeth for Augers A Comprehensive Guide
...
2025-08-14 06:11
1453
DTH drilling refers to a method where the drilling bit is located at the end of a drill string, below the surface of the ground. This technique is distinguished by the use of high-performance percussion hammers, which are positioned on the drill bit. DTH drilling involves the use of compressed air to deliver rapid impacts, breaking rock into smaller fragments. This method is particularly effective in hard rock formations, making it a preferred choice for mining operations and various drilling applications.
...
2025-08-14 06:01
820
6. Bearings
...
2025-08-14 05:02
1324
The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
...
2025-08-14 04:51
467
(3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
...
2025-08-14 04:43
197
Furthermore, environmental sustainability has become a primary focus for energy companies amidst growing concerns about climate change. The 3 32 specification should also consider the impact of perforation methods on surrounding ecosystems. Employing precise and industry-accepted standards allows companies to conduct their activities with minimal disruption to the environment, preserving biodiversity and reducing the carbon footprint of drilling operations.
...
2025-08-14 04:25
1851