The Mechanism Behind DTH Drilling

Durability and Reliability

The term 185% compressors generally refers to portable air compressors that deliver high-performance output, typically rated at 185 cubic feet per minute (CFM). These compressors are designed for heavy-duty applications, making them ideal for construction sites, road works, and renovation projects. The 185% often signifies their exceptional performance relative to their size and fuel efficiency, underscoring their ability to deliver more compressed air than standard compressors within the same category.

Several factors are propelling the growth of the directed drilling rod market. Firstly, the increasing energy demand due to global population growth and industrialization drives the need for efficient extraction methods. Countries are investing in technologies that enhance their drilling capabilities, with directed drilling being a focal point of these advancements.

In recent years, the demand for efficient drilling solutions has soared, especially in industries requiring rigorous digging and excavation. One of the most critical components of a drilling operation is the drill bit, and among the various types available, spiral drill bits stand out for their innovative tooth design. This article discusses the features, benefits, and applications of spiral drill bit teeth, providing insights into why they are increasingly favored in various drilling applications.

What is Down the Hole Drilling?

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

1. Construction Sites Commonly used to power tools like jackhammers, air nailers, and other pneumatic equipment essential for construction projects.

The main components of submarine hammer drilling equipment include the drill rig, hammer, drill pipes, and the drill bit. The drill rig is often mounted on a surface vessel or a floating platform and is designed to support the excessive weight and dynamic forces encountered during drilling operations.