Подшипниковый дробильщик
\text{Horsepower} = \frac{\text{Flow Rate} (GPM) \times \text{Pressure} (psi)}{1714}
The DTH hammer operates through compressed air, which is pumped through a series of valves and chambers within the hammer. When the air pressure builds up, it drives a piston that strikes the drill bit, creating a powerful force that breaks the material. This process continues in rapid succession, allowing the drill bit to penetrate the ground efficiently. The design of the DTH hammer allows for a larger drop height of the piston than traditional rotary drills, resulting in higher impact energy and better drilling performance.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.
2. Increased Accuracy The DTH method offers superior hole quality, producing straighter boreholes with less deviation. This precision is vital for applications that require exact placement of blast holes or geothermal probes.
Mining Industry
Mining Industry
Second, the use and characteristics of the drilling rig:
1). Use:
Engineering anchoring drill can be used in urban construction, railway, highway, river, hydropower and other projects to drill rock anchor hole, anchor hole, blasting hole, grouting hole and other drilling construction.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
Second, the use and characteristics of the drilling rig:
1). Use:
Engineering anchoring drill can be used in urban construction, railway, highway, river, hydropower and other projects to drill rock anchor hole, anchor hole, blasting hole, grouting hole and other drilling construction.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.