Understanding Directed Drilling Rods

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

Чулуу бутлуурын бүтцийн талаар ярихдаа, плита нь нийтдээ хоёр үйлдэлтэй - нэг нь бутлах, нөгөө нь жийгдэх үйлдэл. Эхний үйлдэл нь өндөр даралтаар чулууг таслах бөгөөд хоёрдахь үйлдэл нь жижиг хэсгүүдийг цуглуулах, боловсруулах зориулалттай. Плитагийн дотоод бүтэц нь блок, хагас хагас, тал дундын хэлбэртэй байх боломжтой бөгөөд энэ нь түүний гүйцэтгэлд нөлөөлдөг.

Submarine Hammer Drilling An Insight into Techniques and Applications

As we navigate through the complexities of life, it is vital to remember that setbacks are not the end but often serve as a catalyst for transformation. By embracing challenges, cultivating a growth mindset, strengthening emotional intelligence, supporting one another, practicing self-care, and defining our purposes, we can forge resilience.

- Repair Work Whether in vehicle repair or household fixes, having the right tool for specific tasks can make all the difference. A fractional head hammer provides the flexibility needed to handle various repairs effectively, ensuring that users can adapt the tool to the job at hand.

In recent years, the demand for efficient drilling solutions has soared, especially in industries requiring rigorous digging and excavation. One of the most critical components of a drilling operation is the drill bit, and among the various types available, spiral drill bits stand out for their innovative tooth design. This article discusses the features, benefits, and applications of spiral drill bit teeth, providing insights into why they are increasingly favored in various drilling applications.

Advantages of DTH Hammers

Given Mars' low-pressure environment, the search for life has become increasingly complex. While the thin atmosphere presents challenges, it also raises intriguing possibilities. Life that could potentially exist on Mars might have adapted to these harsh conditions, thriving in subsurface environments where pressure is higher and water may remain stable in liquid form.