185 cfm portable air compressor
Conclusion
3. DTH Drills (Down-The-Hole Drills) These drills are known for their efficiency in drilling deep holes in hard rock. They feature a hammer located directly on the drill bit, which creates high-frequency impacts, breaking rock more effectively.
Manufacturers also rely on these compressors for various processes, including sandblasting, spray painting, and pneumatic conveying
. The dynamic requirements of manufacturing plants often necessitate reliable equipment that can keep up with high output demands, making the 185 CFM compressor a popular choice.
Understanding Down-the-Hole Hammer Drilling
2. Pump Material The selected materials should offer resistance to erosion and corrosion, especially when handling abrasive slurries. Common materials include rubber-lined components, stainless steel, and high-chrome alloys.
1. Flow Rate The flow rate is a critical factor in determining how efficiently the mud pump operates. It is generally expressed in gallons per minute (GPM) or liters per minute (LPM). The flow rate can be calculated using the formula
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.