(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor.

2. Pedestal Pumps Unlike submersible pumps, pedestal pumps have their motor mounted above the water level. They are easy to maintain since the motor is not submerged. However, they are often less efficient for continuous use in flooded areas.

The design of bullet teeth is key to their effectiveness. Typically made from high-grade steel, these teeth often incorporate carbide tips, which enhance their hardness and wear resistance. The conical shape reduces drag during operation, allowing the auger to rotate smoothly and penetrate through tough material with less effort. Additionally, many bullet teeth designs include replaceable components, letting operators replace worn-out parts without needing to change the entire auger head.

Advantages of Using 20mm Drill Rods

Advantages of DTH Hammer Drilling

1. Construction Sites Commonly used to power tools like jackhammers, air nailers, and other pneumatic equipment essential for construction projects.

3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.

Hersteller von Sandpumpen

الخلاصة