drill rod material
- البناء تستخدم في تشغيل الأدوات الهوائية مثل المثاقب المفاجئة والمفكات، مما يؤدي إلى زيادة كفاءة العمل.
- Construction For foundations, pilings, and site preparation, DTH techniques enable precise hole placement and stability in challenging geological conditions.
1.The selection of the pump is too large, and the flow and head are larger than the actual condition due to improper selection of the coefficient. This situation makes the pump in the operation process, cavitation phenomenon, resulting in premature damage of the pump flow parts under the combined action of cavitation and abrasion, in the case of serious cavitation, the pump will produce vibration and noise, and even lead to a sharp decline in the flow, head and efficiency of the pump can not run; In addition, the pump in the operation of large flow, will also cause motor overload, heat, serious will burn the motor.
Quality Control and Testing
The hammer itself can be operated using a pneumatic or hydraulic system, with hydraulic hammers being the preferred choice in most cases due to their consistent performance and reliability. The drill bit used is often designed specifically for marine environments, featuring reinforced materials and cutting edges optimized for hard substrates.
Por otro lado, la incorporación de sistemas de monitoreo y análisis en tiempo real se está volviendo cada vez más común. Estos sistemas permiten a los operadores detectar anomalías en la operación de los chocks y realizar ajustes antes de que se produzcan problemas mayores. De esta manera, se optimiza la eficiencia del laminador y se asegura una producción continua y de alta calidad.
3. Reduced Hole Deviation DTH hammers produce straighter holes compared to rotary drilling tools. This precision reduces the need for corrective drilling, saving time and resources.
Производитель dth hammer

