A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

Some food products will include titanium dioxide on their nutrition label. But again, it can be hard to tell for those who don't list the ingredient. 

Separately, concerns have been raised about titanium dioxide impacting one's genetic code. This can be traced to a 2009 study which found that titanium dioxide nanoparticles caused DNA damage and genetic instability in mice. A 2022 study published in Food and Chemical Toxicology also raised concerns about the DNA-damaging effects of titanium dioxide as a food additive. The study noted that results evidenced a DNA-damaging effect, and added that there may also be impacts to chromosomal integrity, an indicator of cancer risk.

Wegman’s puts titanium dioxide in its Original Macaroni and Cheese. Campbell’s Healthy Request Chunky Chicken Corn Chowder has it, as does Food Club’s Chunky New England Clam Chowder. Marzetti uses the color agent to brighten its Cream Cheese Fruit Dip. Dairy products usually don’t need titanium dioxide to look white, but Kroger has decided to add titanium dioxide to its Fat Free Half-and-Half. And titanium dioxide isn’t only in especially white or brightly colored foods: Little Debbie adds it to Fudge Rounds and many other products. According to the Food Scores database maintained by Environmental Working Group, more than 1,800 brand-name food products have titanium dioxide on their ingredients list. That said, it can still lurk as an unspecified “artificial color,” or labels might simply say “color added.”

In a statement sent to USA TODAY on Sunday, Justin Comes, vice president of research and development for Skittles maker Mars Wrigley North America, said the company couldn't comment on pending litigation – but that its use of titanium dioxide and all Mars Wrigley ingredients are safe and manufactured in compliance with strict quality and safety requirements established by food safety regulators, including the FDA.

Topical Exposure 

Titanium dioxide market trend analysis and prediction

A European ban of titanium dioxide in food took effect in 2022, but it is still legal for use in food in the U.S.

Titanium dioxide, or TiO2, will be listed on product labels, but companies are not required to list ingredient size or structure. When it is used in sunscreens to block UV light, titanium dioxide is considered an active ingredient, which means the concentration must also be listed.

Is titanium dioxide illegal in other countries?

In conclusion, the CaCO3 and TiO2 factory plays a vital role in supporting industrial and economic development by producing high-quality materials for a wide range of applications. The continued growth of industries such as construction, agriculture, and manufacturing relies on the availability of CaCO3 and TiO2 from reliable sources like the factory. As technology advances and demand increases, the factory will continue to innovate and expand its production capacity to meet the needs of a rapidly changing world.