fábrica de peças de reposição de bomba de resíduos


(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.

...

Post-processing of large castings, large foundry processing manufacturers can use liquid sandblasting to clean the oxide scale and residue on the surface of the casting, which can not only remove impurities, but also play a role in polishing and improving the surface finish of the casting; Use grinding wheels, abrasive cloths, sandpaper and other abrasives to remove impurities such as burrs, protrusions and oxide scales on the surface of steel castings, so that the surface is smooth. In addition, methods such as mechanical, electrochemical and chemical polishing can further improve the gloss and corrosion resistance of castings.

...

The term 185% compressors generally refers to portable air compressors that deliver high-performance output, typically rated at 185 cubic feet per minute (CFM). These compressors are designed for heavy-duty applications, making them ideal for construction sites, road works, and renovation projects. The 185% often signifies their exceptional performance relative to their size and fuel efficiency, underscoring their ability to deliver more compressed air than standard compressors within the same category.


...

The eccentric shaft is another significant part of the jaw crusher's design. It is the component that imparts the crushing motion to the movable jaw plate through the pitman. As the eccentric shaft rotates, it creates an oscillating motion that allows the jaw plates to open and close. The shaft is usually made of high carbon steel for strength and durability, allowing it to withstand the heavy forces encountered during operation.


...

디젤 공기 압축기는 디젤 엔진을 동력으로 하여 공기를 압축하는 장비입니다. 이 기계는 주로 건설 현장, 공장, 그리고 견고한 야외 작업 환경에서 사용됩니다. 압축된 공기는 다양한 도구와 기계를 작동시키는 데 필요한 에너지원으로 활용됩니다. 90 CFM의 출력은 일반적으로 소형 건설 장비나 공구를 동시에 운영하는 데 매우 효율적입니다.


...