1. Flow Rate The flow rate is a critical factor in determining how efficiently the mud pump operates. It is generally expressed in gallons per minute (GPM) or liters per minute (LPM). The flow rate can be calculated using the formula

Conclusion

Understanding Submarine Hammer Drilling

The Future of Drilling in Mining

The reason:
The suction pipe is not filled with water
Blocked suction line or inadequate valve opening
The inlet pipe of the pump, the meter or the stuffing box are serious

Understanding Heavy Slurry Pumps

Umuman olganda, burg'ulash vositalarining narxlari ko'plab omillarga, jumladan, materiallar, texnologiyalar, talab va taklifga bog'liq bo'lsa-da, tanlangan vositalarning sifatiga, ishlov berish samaradorligiga va ishchilar tajribasiga ham e'tibor berish zarur. Kelajakda, burg'ulash sektoridagi innovatsiyalar va yangi texnologiyalar natijasida, bu narxlar o'zgarishi va yanada raqobatbardosh bo'lishi mumkin.

(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.