유지보수 및 관리

Equipment and Technology

1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.

Quality control is a cornerstone of the manufacturing process in rubber slurry pump factories. Each pump undergoes rigorous testing to assess its performance under various conditions. This includes pressure tests, flow tests, and wear tests, simulating real-world operating environments. Factories use specialized equipment to measure parameters such as flow rates and pressure drops, ensuring that each pump performs to the required specifications.

Secondly, rubber slurry pumps are known for their efficient performance. Their design allows for smooth operation, reducing energy consumption compared to traditional metal pumps. This efficiency translates into cost savings for businesses, making rubber slurry pumps a popular choice among manufacturers.

በቅርብ እንዲሕ ውሳኔ ቢይኖሪ በሚይukkut አነሳምይክቶቱ ለምርም ዳሩ ዬይወዛ፡፡

디젤 공기 압축기의 사용 사례

Teshkilot va Asboblar Burg'ulash Vositalarining Narxlari

Slurry pump in the use of the process will find blockage, so how should we deal with this problem, many customers think that this is a more complex problem, but if the blockage problem is not handled well, it will cause damage to the equipment, which will also affect the efficiency of use, then slurry pump blockage problem we should pay special attention to it. So how to deal with the slurry pump blockage problem? The following part explains the treatment method of slurry pump blockage.

The roller drill uses the rolling action of the roller bit to break the rock and is suitable for drilling holes of 150 ~ 440 mm in diameter on the hard rock. It has the advantages of high efficiency and low labor intensity, and is widely used in large and medium-sized open-pit metal mines. The drill consists of an impactor (or drill bit), a rotary mechanism, a lifting mechanism, a pressure device, a walking mechanism, a slag discharge system, a drill frame and a drill pipe. Rotary drilling machines are only suitable for drilling softer minerals and coal.