fabricant de pompe de gravier
- Automatic Operation Many modern sump pumps feature automatic floats that trigger the pump to turn on and off based on water levels. This is invaluable during heavy rains when continuous evacuation is necessary.
Производитель грязных насосов Бизнес и технологии в Кыргызстане
To ensure optimal performance from a 185% compressor, regular maintenance is crucial. Operators should carry out routine checks on oil levels, air filters, and belts to prevent breakdowns and maintain efficiency. It’s also essential to follow the manufacturer’s guidelines for servicing, which includes filter replacements and engine checks.
2. Rock drill: used to drill holes with a diameter of 20 ~ 100 mm and a depth of less than 20 meters in rocks above medium and hard. According to its different power can be divided into pneumatic, internal combustion, hydraulic and electric rock drill, of which pneumatic rock drill is the most widely used.
Due to the machine's working environment being prone to intense vibrations and impacts, constantly observe the dynamics of various parts during operation. If you detect abnormal noise or other irregularities, shut down the machine immediately for inspection and repair before resuming operation. If hydraulic system connectors leak or components become loose, shut down the machine for adjustment and tightening. After ensuring everything is normal, you can resume operation. Before completing each shift, lower the hydraulic hammer to the lowest position and retract all other hydraulic cylinders to their shortest length. If moving a distance, keep the mast leaning backward. For the machine's components, accessories, and electrical equipment, perform regular inspections, especially the connections in the wiring of the motor. During operation, there should be designated personnel for guidance. The guide and the operator should check signals with each other before work and cooperate closely. At the start, use a bell or other methods to signal and inform surrounding personnel to move away. The machine should start at a low speed and gradually accelerate to high speed.
FAQs
FAQs