Building Strong Partnerships

Understanding Submarine Hammer Drilling

3. DTH Drills (Down-The-Hole Drills) These drills are known for their efficiency in drilling deep holes in hard rock. They feature a hammer located directly on the drill bit, which creates high-frequency impacts, breaking rock more effectively.

Advantages of DTH Hammer Drilling

1. Mining Industry In mining operations, heavy slurry pumps play a critical role in the extraction and processing of minerals. They are used to transport slurries containing ores, which can be heavily loaded with solids. These pumps facilitate the movement of material from the mining site to processing plants, significantly enhancing operational efficiency while reducing the risk of equipment damage due to the abrasive nature of mine slurries.

3. Flow Rate and Pressure Determine the required flow rate and the pressure at which the slurry needs to be transported. This will influence the type of pump chosen, as different pumps have specific performance curves.

การเลือกซื้อคอมเพรสเซอร์ลม CFM 185

The eccentric shaft is another significant part of the jaw crusher's design. It is the component that imparts the crushing motion to the movable jaw plate through the pitman. As the eccentric shaft rotates, it creates an oscillating motion that allows the jaw plates to open and close. The shaft is usually made of high carbon steel for strength and durability, allowing it to withstand the heavy forces encountered during operation.

(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor.