3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm.

(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.
The horizontal slurry pump should be used for regular maintenance. This can effectively avoid the problem of slurry pump blockage, and if you encounter these problems in the process of using slurry pump in the later stage, you can solve them according to the above steps.

As a merit in the mining of rock, the drilling rig has to be mentioned. In addition, the drilling rig can also be used as a breaker to break up hard layers such as concrete. According to its power source, the rock drill can be divided into four categories: pneumatic rock drill, internal combustion rock drill, electric rock drill and digging and changing drill.

The use of wood mold or lost foam requires the mold to be consistent with the real thing, the appearance is smooth, and the yield and surface finish of the casting are improved, so as to reduce flash, burr and cold separation.

1. Drill Bits The drill bit is the cutting tool at the end of the drill string responsible for penetrating rock layers. There are various types of drill bits, including roller cone bits, fixed cutter bits, and diamond bits, each designed for specific geological formations and drilling conditions. Selecting the right drill bit is crucial for maximizing penetration rates and minimizing costs.

5. Enhanced Safety Safety is a paramount concern in drilling operations. DTH hammer drilling minimizes the risks associated with traditional drilling methods, such as drill string failures or excessive vibration. The compact design of DTH equipment also allows for easier handling and reduced risk of accidents on job sites.

3. DTH Drills (Down-The-Hole Drills) These drills are known for their efficiency in drilling deep holes in hard rock. They feature a hammer located directly on the drill bit, which creates high-frequency impacts, breaking rock more effectively.

3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.

In conclusion, the sales of directed drilling rods are set to rise as the industry adapts to the growing demand for efficient and environmentally friendly drilling solutions. The convergence of technology and traditional drilling practices will redefine the future of this market, ensuring that directed drilling remains at the forefront of resource extraction strategies. As firms invest in innovation and sustainability, directed drilling rods will undoubtedly become indispensable tools in the quest for energy security and environmental stewardship.