3. Salt water or alkali washing: In order to remove the residual acid in the dissolution tank, it is necessary to carry out salt water or alkali washing treatment on the steel wire to ensure that the surface of the steel wire is clean.
- This material itself has the advantages of good integrity, uniform force, high strength, wear resistance, corrosion resistance and so on. Moreover, the production process is simple and the degree of industrialization is high, so its economic benefits are better than other metal mesh materials. In some industrially developed countries, this material has long been used in urban and rural roads, tarmac runway is also widely used. The application of galvanized wire welding net in the construction industry is countless, and the application of galvanized wire welding net in the construction industry has been greatly developed.
- (2) Electric galvanized shaft wire direct selling shall not be used as waist hoop down reinforcement, usually not used as all binding.
- Electric welding net welding after galvanized is after the completion of the welding and then cold galvanized or hot galvanized; After the first galvanized welding is to change the wire welding mesh, welding can be seen after the completion of the welding spot; The two processes are different prices are also very different, the cost of the first plating after welding is low, the surface is smooth, and the cost of the first welding after plating is higher, not easy to rust.
- 2. Select according to features
- In fact, although galvanized hook net is a useful material for iron products, but fundamentally speaking, modern hook net through continuous transformation and improvement, even if it seems to be not useful products, also have a role in its use, here we can turn our attention to people abandoned galvanized hook net.
- Galvanized hexagonal net is a galvanized metal wire mesh, the shape of the grid is hexagonal.
The protective duration of galvanized iron wire is closely related to the thickness of galvanized iron wire. In general, zinc layer thickness needs to be very high in dry main gas and indoor applications, but in harsh environments. Therefore, in the selection of galvanized layer thickness, the impact of the environment should be considered. If galvanized iron wire products of different diameters are required, material selection and coating should be controlled reasonably.
- 3, twisting hexagonal net factory weight, the greater the weight, the more sufficient material.
Post time: 26-10-22- In fact, although galvanized hook net is a useful material for iron products, but fundamentally speaking, modern hook net through continuous transformation and improvement, even if it seems to be not useful products, also have a role in its use, here we can turn our attention to people abandoned galvanized hook net.
- Barbed wire, on the one hand, is a great protection against livestock theft, because the surface is covered with sharp spikes that make it very difficult to penetrate through the barbed wire. On the other hand, because livestock generally have the habit of bumping, the barbed rope is used to circle, which makes the livestock dare not rush to collide with the barbed rope, so as to save the use cost of users.
- Generally speaking, in dry main gas and indoor use, the thickness of galvanized coating is only 6-12μm, but under poor environmental conditions, the thickness of galvanized coating is 20μm, can reach 50μm. Therefore, environmental factors should be considered when choosing the thickness of galvanized layer. Galvanized layer after passivation treatment, can naturally form a layer of bright, beautiful color passivation film, can obviously improve its protective function, decorative.
Pay attention to safety in line collection and operation, others without the consent of the monitor, Ben have to get on the bus operation. The reels should be placed lightly, stacked firmly and neatly, not more than 5 reels. Direct contact with acid and alkali must be prohibited. When the acid fog exceeds the specified target of the state, measures should be taken to control it in time, otherwise production is not allowed.
Pet cage has many types, and selective is bigger, pet cages are generally made of wire, with better coarse, then at the bottom with a wheel base, such a simple pet basket was made, in the wheel at the bottom of the mount is for the convenience of the mobile, a pet cages should also adapt to the location of the production in addition to a door, Convenient in pet feeding when more convenient.
- C, coating uniformity: galvanized layer is basically uniform with copper sulfate solution test etched five times without exposing iron.
Post time: 22-03-23- The most obvious difference in a short time is the cross section of this piece, hot dip galvanized barbed wire because of surface anticorrosion treatment, so there will be rust in the cross section of this piece, and stainless steel barbed wire because the internal raw materials and surface raw materials are consistent, so there is no such situation.
Post time: 17-02-23Galvanized hexagonal net is a kind of galvanized metal wire mesh, mesh shape is hexagonal.
- A remarkable characteristic of stainless steel wire rope is its inherent corrosion resistance to concentrated nitric acid and dilute nitric acid, which makes it easy to be distinguished from most other metals or alloys. But high carbon 420 and 440 steel in the nitric acid point test is slightly corroded, non-ferrous metal encountered concentrated nitric acid is immediately corroded, and dilute nitric acid has strong corrosion on carbon steel.
- Determine the size of the dog cage based on the dog’s actual adult size. In general, the cage should be three times the size of the dog’s body and give him enough room to turn around and so on.
- Barbed wire welding is the reason for the occurrence of black spots is because the welding wire action to be timely in the melting time, development should be appropriate, no argon, long time burning, current, distance, tungsten needle blunt, molten pool temperature is high, is the root cause of blackening. Continuous burning, is about the active welding machine energy selection, machine welding will appear black spots.
- Of course, the quality of any kind of product is also affected by the implementation of the specification by the manufacturer. If the manufacturer of electric welding mesh has no high implementation specification in the production itself, or the procedure specification has declined in the production line, or there is no higher requirement on the production link.