5. Enhanced Safety Safety is a paramount concern in drilling operations. DTH hammer drilling minimizes the risks associated with traditional drilling methods, such as drill string failures or excessive vibration. The compact design of DTH equipment also allows for easier handling and reduced risk of accidents on job sites.

Several factors are propelling the growth of the directed drilling rod market. Firstly, the increasing energy demand due to global population growth and industrialization drives the need for efficient extraction methods. Countries are investing in technologies that enhance their drilling capabilities, with directed drilling being a focal point of these advancements.

2. Construction and Civil Engineering Heavy slurry pumps are equally important in construction, particularly in the dredging process where materials like sand, silt, and clay are extracted from water bodies. They help in maintaining the flow of materials and can be used in dewatering applications during excavation processes, significantly accelerating project timelines.

The Growing Market

3. Manufacturing Many manufacturing processes depend on rotary air compressors for powering assembly line tools, material handling equipment, and more. Their efficiency can significantly enhance production rates.

Cleaning method:
Fill the pump with water
Content introduction
Problem: pump does not water, pressure gauge and true empty meter pointer beat violently.

(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor.

The reason:
The suction pipe is not filled with water
Blocked suction line or inadequate valve opening
The inlet pipe of the pump, the meter or the stuffing box are serious

Down-the-hole hammer drilling is a technique used primarily for drilling boreholes in hard rock applications. It employs a pneumatic hammer, situated directly at the drill bit, to deliver high-impact blows that effectively break up the rock. This method contrasts with traditional rotary drilling, where the drill bit operates at the surface and relies on torque and weight to penetrate the ground.