FAQs
FAQs
...
2025-08-15 02:58
1488
20 mm de forage
FAQs
Moreover, environmental concerns have prompted innovations in downhole equipment aimed at minimizing ecological impact. Biodegradable drilling fluids and closed-loop systems are becoming more common to reduce waste and ensure effective environmental protection during drilling operations.
...
2025-08-15 02:50
2514
First, the classification of drilling RIGS:
1, according to the use of the address is not the same, the drill can be divided into underground and open air two categories. According to the presence or absence of traveling structure, the drilling rig can be divided into self-propelled type and non-self-propelled type. There are many open-pit drilling RIGS in China, most of which are self-propelled.
2, according to the aperture is not the same, the drill can be divided into light drilling rig, medium drilling rig, heavy drilling rig.
1, according to the use of the address is not the same, the drill can be divided into underground and open air two categories. According to the presence or absence of traveling structure, the drilling rig can be divided into self-propelled type and non-self-propelled type. There are many open-pit drilling RIGS in China, most of which are self-propelled.
2, according to the aperture is not the same, the drill can be divided into light drilling rig, medium drilling rig, heavy drilling rig.
...
2025-08-15 02:40
2437
Moreover, the introduction of cool roofing materials, which reflect more sunlight and absorb less heat, has become essential in combating the urban heat island effect. These innovative products not only improve indoor comfort but also reduce energy consumption, contributing to a more sustainable environment.
...
2025-08-15 02:39
2008
2. Automotive Repair In garages, mechanics rely on these compressors to operate pneumatic tools, paint sprayers, and tire inflators. Their consistent air delivery is crucial for efficient repairs and maintenance.
...
2025-08-15 01:59
1363
Submarine hammer drilling, often referred to as underwater percussion drilling, is an advanced technique utilized primarily in marine construction and resource exploration. This method combines the principles of traditional drilling with hydraulic and pneumatic operations, enabling the effective penetration of hard substrates beneath the sea floor. In this article, we will explore the processes, equipment, advantages, and applications of submarine hammer drilling.
...
2025-08-15 01:46
2668
Dust storms are another significant feature of Martian weather. These storms can envelop the entire planet and significantly reduce visibility. The dynamics of these storms are influenced by the low atmospheric pressure, leading to fascinating research opportunities.
...
2025-08-15 01:26
2944
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank
...
2025-08-15 00:40
831
Conclusion
...
2025-08-15 00:22
2013
Air compressors work by converting power into potential energy contained in pressurized air. A 185 CFM air compressor denotes the volume of air it can deliver in a minute, making it suitable for medium- to heavy-duty applications. These compressors are typically powered by gasoline or diesel engines, offering portability and efficiency. Their ability to produce a consistent flow of air at high pressure makes them ideal for various pneumatic tools, sprayers, and other machinery.
...
2025-08-15 00:13
2096
