barras de perfuração de precisão

  • 1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
  • ...

    Recent advancements include the development of smart slurry pumps equipped with sensors that monitor pump performance in real-time. These sensors can provide data on flow rates, pressure levels, and wear patterns, allowing for predictive maintenance and minimizing unexpected failures. Moreover, advances in materials science have led to the creation of more resilient pump components, extending service life and reducing the frequency of replacements.


    ...

    One of the most critical components of a jaw crusher is the jaw plates. These are the surfaces that come into direct contact with the material being crushed. They typically come in two varieties the fixed jaw plate and the movable jaw plate. The fixed jaw plate is stationary and mounted on the frame, while the movable jaw plate moves back and forth, creating a crushing motion. The wear and tear of jaw plates are significant since they constantly encounter abrasive materials. Hence, they are often manufactured from high-grade manganese steel to enhance their durability.


    ...