Asia

The basic scenario of resistive switching in TiO₂ (Jameson et al., 2007) assumes the formation and electromigration of oxygen vacancies between the electrodes (Baiatu et al., 1990), so that the distribution of concomitant n-type conductivity (Janotti et al., 2010) across the volume can eventually be controlled by an external electric bias, as schematically shown in Figure 1B. Direct observations with transmission electron microscopy (TEM) revealed more complex electroforming processes in TiO₂ thin films. In one of the studies, a continuous Pt filament between the electrodes was observed in a planar Pt/TiO₂/Pt memristor (Jang et al., 2016). As illustrated in Figure 1C, the corresponding switching mechanism was suggested as the formation of a conductive nanofilament with a high concentration of ionized oxygen vacancies and correspondingly reduced Ti³⁺ ions. These ions induce detachment and migration of Pt atoms from the electrode via strong metal–support interactions (Tauster, 1987). Another TEM investigation of a conductive TiO₂ nanofilament revealed it to be a Magnéli phase Ti_nO_2n−1 (Kwon et al., 2010). Supposedly, its formation results from an increase in the concentrations of oxygen vacancies within a local nanoregion above their thermodynamically stable limit. This scenario is schematically shown in Figure 1D. Other hypothesized point defect mechanisms involve a contribution of cation and anion interstitials, although their behavior has been studied more in tantalum oxide (Wedig et al., 2015; Kumar et al., 2016). The plausible origins and mechanisms of memristive switching have been comprehensively reviewed in topical publications devoted to metal oxide memristors (Yang et al., 2008; Waser et al., 2009; Ielmini, 2016) as well as TiO₂ (Jeong et al., 2011; Szot et al., 2011; Acharyya et al., 2014). The resistive switching mechanisms in memristive materials are regularly revisited and updated in the themed review publications (Sun et al., 2019; Wang et al., 2020).

≤0.3

While IARC listed titanium dioxide as “possibly carcinogenic to humans,” they also add that “there is inadequate evidence in humans for the carcinogenicity of titanium dioxide.” Of the four human studies that they reviewed, only one showed a potential risk for occupational workers inhaling titanium dioxide particles and lung cancer, while the other three showed no risk for cancer at all. And it’s key to note that IARC did not assess the effects of titanium dioxide found in foods.

While loose titanium dioxide presents a problem, titanium dioxide within sunscreen formulations presents a much safer option than conventional sunscreen chemicals like oxybenzone and octinoxate. However, titanium dioxide may become dangerous when it is nanoparticle size. Generally, nanoparticles can be 1000 times smaller than the width of a human hair. Despite nanoparticles becoming increasingly common across industries, they have not been properly assessed for human or environmental health effects, nor are they adequately regulated. Researchers don’t quite understand the impacts nanoparticles could have on human health and the environment. However, because of their infinitesimally small size, nanoparticles may be more chemically reactive and therefore more bioavailable, and may behave differently than larger particles of the same substance; these characteristics may lead to potential damage in the human body or ecosystem.

While IARC listed titanium dioxide as “possibly carcinogenic to humans,” they also add that “there is inadequate evidence in humans for the carcinogenicity of titanium dioxide.” Of the four human studies that they reviewed, only one showed a potential risk for occupational workers inhaling titanium dioxide particles and lung cancer, while the other three showed no risk for cancer at all. And it’s key to note that IARC did not assess the effects of titanium dioxide found in foods.

Blanc de Comines, 27 per cent zinc sulphide, 70.5 per cent barium sulphate, 2.5 per cent zinc carbonate.

Lithopone or sulphide of zinc white has been in general use for twenty years or more in many industries where a white pigment of considerable body or hiding power is required that is not subject to change like lead carbonate and has not the brittle character of zinc oxide, besides being sold at a lower figure than either of these. Nevertheless it is still comparatively new to the general painting trade. Because of our tariff protection its manufacture in this country has made great progress. Yet in spite of this and the duty imposed on it, the imports are still in excess of the quantity manufactured here. A short history of its origin will no doubt prove of interest to our readers.

The photocatalytic properties of TiO 2 are used in modern technologies. Photo catalysis is the acceleration of a chemical reaction under the influence of light (UV radiation, visible radiation, infrared) in the presence of a photocatalyst. Titanium white appropriately ground to the size of nanoparticles has unique photocatalytic properties and can get from rutile titanium dioxide supplier.

Fig. 3. Cell survival measured on samples of MSSA with bare and functionalized P25TiO₂NPs after 6 h of irradiation. A: P25TiO₂NPs, B:vitaminB2@P25TiO₂NPs, C: vitaminC@P25TiO₂NPs in concentrations of 0.2 μg/mL (red) and 0.2 mg/mL (blue). p <0.05.