porcelana de perfuração
The roller drill uses the rolling action of the roller bit to break the rock and is suitable for drilling holes of 150 ~ 440 mm in diameter on the hard rock. It has the advantages of high efficiency and low labor intensity, and is widely used in large and medium-sized open-pit metal mines. The drill consists of an impactor (or drill bit), a rotary mechanism, a lifting mechanism, a pressure device, a walking mechanism, a slag discharge system, a drill frame and a drill pipe. Rotary drilling machines are only suitable for drilling softer minerals and coal.
2, according to the aperture is not the same, the drill can be divided into light drilling rig, medium drilling rig, heavy drilling rig.
2, according to the aperture is not the same, the drill can be divided into light drilling rig, medium drilling rig, heavy drilling rig.
Moreover, adherence to international quality standards, such as ISO certifications, is vital for manufacturers. These certifications not only enhance the credibility of the products but also ensure that they meet environmental and safety regulations.
Where pump displacement is the volume of fluid moved per cycle and the pump speed is the number of cycles per minute
.
Types of Jaw Plates
The following matters should be paid attention to during the use of the drilling rig, and the correct use can bring greater benefits
The following matters should be paid attention to during the use of the drilling rig, and the correct use can bring greater benefits
Understanding Down the Hole Drilling Rigs An Essential Tool in Modern Mining and Construction
The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high