Despite a bullish trends ruling the market for the bulk of the period, the North American market had mixed sentiments in the fourth quarter of 2021. This was mostly due to the adequate pushback from the supply-demand imbalance, which was further compounded by rising natural gas prices, which had taken a proper toll on the future production of numerous minerals, including titanium dioxide. An increase in COVID instances had prompted concerns in ore feedstock. As a result, during the fourth quarter of 2021, the FD UGSC (USA) quarterly average negotiations for the chemical CP Rutile Grade were finalised at USD 4434 per tonne.

Although the evidence for general toxic effects was not conclusive, on the basis of the new data and strengthened methods our scientists could not rule out a concern for genotoxicity and consequently they could not establish a safe level for daily intake of TiO₂ as a food additive.

Risks

Additional Health Concerns Linked to Titanium Dioxide

In 2021, the European Food Safety Authority concluded that titanium dioxide is no longer safe in foods due to the same concerns over nanoparticles. As a result, titanium dioxide is now banned as a food additive in the EU. Although studies have shown that the absorption of ingested titanium dioxide is low, evidence suggests that titanium dioxide nanoparticles can accumulate in the body over time. Health Canada deemed it safe in 2022 but noted concerns. Unlike their European counterparts, Canadian officials did not consider studies performed with titanium dioxide nanoparticles alone. 

Application of lithopone in rubber and plastics application of lithopone in plastics and pigments lithopone can whiten and improve the compressive strength of products. Lithopone is easy to disperse rapidly, and thus the production process of this product is convenient, especially the molding, injection molding and actual operation process. It is worth mentioning that, with its organic chemical plasticity, it can also be integrated into the vulcanized rubber effect of recycled rubber.

Now imagine the delicate skin on your face, on your children’s arms & legs. Each day un-knowingly, thinking we are doing the right thing, we slather them up with titanium dioxide in the form of sunscreen & send them out into the sun, all the while never knowing that once exposed to light titanium dioxide creates free radicals that are strong enough to damage steel roofing panels!!

Finally, it's important to consider the global trends impacting the pigment industry as a whole. Environmental regulations, technological advancements, and sustainable practices are increasingly becoming part of the conversation. Suppliers that prioritize eco-friendly production methods or offer biodegradable alternatives may appeal to buyers willing to pay a higher price for sustainably sourced materials.

105°C volatile matter, %

In a small study published in the European Journal of Nutrition in 2020, researchers examined the effects of several food additives, including titanium dioxide, along with artificial sweeteners and cleaning products by testing the fecal samples of 13 people. Titanium dioxide was among the samples that “induced significant shifts in microbiome community structure.”  The growth of the bacterium species belonging to C. leptum, which has been shown to decrease in patients with inflammatory bowel disease, “significantly decreased in the presence of … titanium dioxide” among other additives and sweeteners tested.

From dyes to flavorings, many people are becoming increasingly aware of the ingredients in their food.

Molar mass: 412.23

R-895 is a paint grade titanium dioxide pigment produced by the chlorination process. Recommended for use in a variety of coating applications.

Titanium dioxide R-5566, a rutile titanium dioxide pigment treated with zirconium and aluminum inorganic surface and organic surface, has the characteristics of high whiteness, high gloss, high achromatic power, high weather resistance, and good dispersibility.

According to CCM, many enterprises, which belong to the top exporting producers of TiO2 in China, will speed up their efforts to go public. Reasons are the strong rebound of the TiO2 market in China as well as the positive view on 2017.

What is an exposure route? 

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.