tabla de precios de perforación

  • 3. Open-air drilling rig: according to the different working mechanism of crushing ore and rock, it is divided into steel rope percussion drill, drilling rig, cone drill and rotary drill. Because of low efficiency, the steel rope percussion drill has been gradually replaced by other drilling RIGS. The drill pipe drives the pneumatic impactor and the drill bit to rotate together, and the piston of the pneumatic impactor is used to impact the drill bit to break the ore and rock, which is usually used in small and medium-sized mines to drill holes with a diameter of 80 to 250 mm. The roller drill uses the rolling action of the roller bit to break the rock and is suitable for drilling holes of 150 ~ 440 mm in diameter on the hard rock. It has the advantages of high efficiency and low labor intensity, and is widely used in large and medium-sized open-pit metal mines. The drill consists of an impactor (or drill bit), a rotary mechanism, a lifting mechanism, a pressure device, a walking mechanism, a slag discharge system, a drill frame and a drill pipe. Rotary drilling machines are only suitable for drilling softer minerals and coal. The common feature of these devices is that the degree of automation is getting higher and higher, and some functions realize the application of intelligent i GPS technology on these RIGS, which realizes the automatic positioning of the boom, saves the time of field marking and positioning, improves the efficiency of the operation, and enables the operator to concentrate on monitoring the process of drilling. At the same time, more attention is paid to safety and environmental protection and the improvement of human-machine relationship. With the impact of the implementation of engine emission regulations, mobility, intelligent handling and environmental regulations Tier 3/ Euro ⅢA emission regulations, most foreign rig manufacturing companies have adopted diesel engines that meet the emission standards
  • ...

    A DTH hammer is a type of percussion drilling tool that functions by delivering a series of rapid impacts to the drill bit, which then breaks the rock or other materials beneath the surface. The term down-the-hole refers to the hammer being placed directly above the drill bit, allowing the energy from the hammer to be transferred efficiently into the drill bit. This method enhances the speed and effectiveness of drilling operations, particularly in hard rock formations.


    ...

    Sandpumpen werden verwendet, um abrasive Materialien wie Sand, Kies oder Schlamm zu transportieren. Sie kommen häufig in der Bauindustrie zum Einsatz, beispielsweise beim Aushub von Fundamenten oder dem Transport von Baumaterialien. Auch in der Bergbauindustrie sind sie von großer Bedeutung, da sie dabei helfen, Rohstoffe effizient zu fördern und zu verarbeiten. Zudem spielen Sandpumpen eine entscheidende Rolle in der Umwelttechnik, etwa bei der Sanierung von kontaminierten Böden.


    ...