5 16 drill rod
Problem: Mine slurry pump does not water, pressure gauge and true empty meter pointer beat violently.
FAQs
FAQs
Drill pipes are essential for transmitting drilling fluids and rotational force from the surface to the drill bit. High-strength steel alloys are commonly used for drill pipes due to their ability to withstand high torque and pressure.
Advantages of Submarine Hammer Drilling
fabricantes de bombas de escória vertical

3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
2. Reduced Friction The helical shape minimizes friction between the drill bit and the material. This reduction in friction leads to less wear and tear on both the drill bit and the drilling equipment, extending their lifespan.
The DTH hammer operates through compressed air, which is pumped through a series of valves and chambers within the hammer. When the air pressure builds up, it drives a piston that strikes the drill bit, creating a powerful force that breaks the material. This process continues in rapid succession, allowing the drill bit to penetrate the ground efficiently. The design of the DTH hammer allows for a larger drop height of the piston than traditional rotary drills, resulting in higher impact energy and better drilling performance.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.