martelo de buraco submersível
The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
Conclusion
The DTH hammer is undeniably a cornerstone of modern drilling technology. Its efficiency, versatility, and precision make it an indispensable tool for a wide range of applications. As the industry continues to evolve, manufacturers are committed to developing innovative solutions that further enhance the capabilities of DTH hammers, ensuring they remain at the forefront of drilling technology for years to come. With the right DTH hammer, companies can optimize their drilling operations, mitigate costs, and achieve their project goals with greater ease.
The eccentric shaft is another significant part of the jaw crusher's design. It is the component that imparts the crushing motion to the movable jaw plate through the pitman. As the eccentric shaft rotates, it creates an oscillating motion that allows the jaw plates to open and close. The shaft is usually made of high carbon steel for strength and durability, allowing it to withstand the heavy forces encountered during operation.
Furthermore, the energy sector benefits from the ZJ slurry pump's capabilities in handling ash and other byproducts of power generation, ensuring that these materials are moved safely and efficiently to disposal sites.
4. Kết luận
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.