eixo da bomba hidráulica
- Industrial Applications Facilities that experience high moisture levels or require regular removal of liquids from particular areas benefit from industrial-grade drainage pumps.
3. Environmental Remediation Bullet teeth are also used in augers for soil sampling and contamination assessment. Their precision and effectiveness facilitate the extraction of soil cores for testing.
bullet teeth for augers

Rubber slurry pumps have become indispensable in various industries, especially in mining, construction, and wastewater management. These pumps are designed to handle abrasive and corrosive materials, making them ideal for transporting slurries – mixtures of solids and liquids. The intricate process of manufacturing rubber slurry pumps involves advanced technology, skilled craftsmanship, and a deep understanding of materials. This article delves into the operations, benefits, and innovations within rubber slurry pump factories.
1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.