05 SYSTEM INSPECTION

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

1. Drill Bits The drill bit is the cutting tool at the end of the drill string responsible for penetrating rock layers. There are various types of drill bits, including roller cone bits, fixed cutter bits, and diamond bits, each designed for specific geological formations and drilling conditions. Selecting the right drill bit is crucial for maximizing penetration rates and minimizing costs.

3. Customization Options Chinese manufacturers are increasingly able to provide customized solutions to meet specific industry or operational needs. This flexibility can be particularly beneficial for businesses with unique requirements.

1. Rotary Drills These are commonly used for deep hole drilling, making them ideal for mineral exploration. Rotary drills operate using a rotating drill bit that cuts through rock layers with the aid of a drilling fluid that cools the bit and removes cuttings from the hole.

5. Enhanced Safety Safety is a paramount concern in drilling operations. DTH hammer drilling minimizes the risks associated with traditional drilling methods, such as drill string failures or excessive vibration. The compact design of DTH equipment also allows for easier handling and reduced risk of accidents on job sites.

Exploring the CFM 185 Air Compressor A Comprehensive Overview

(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.

04 REPLACE WEAR PARTS

One of the key benefits of spiral foraging is its efficiency. By following a spiral path, foragers can ensure that they cover a defined area thoroughly, allowing them to gather a diverse array of plants and fungi while avoiding the potential pitfall of overharvesting any single species. This technique is particularly useful for those new to foraging, as it encourages a more methodical exploration of nature, reducing the risk of overlooking valuable resources or damaging sensitive habitats.