dth hammer drill bits

  • 1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
  • ...

    The roller drill uses the rolling action of the roller bit to break the rock and is suitable for drilling holes of 150 ~ 440 mm in diameter on the hard rock. It has the advantages of high efficiency and low labor intensity, and is widely used in large and medium-sized open-pit metal mines. The drill consists of an impactor (or drill bit), a rotary mechanism, a lifting mechanism, a pressure device, a walking mechanism, a slag discharge system, a drill frame and a drill pipe. Rotary drilling machines are only suitable for drilling softer minerals and coal.

    ...

    CFM, or Cubic Feet per Minute, is a crucial metric in assessing the performance of air compressors. It indicates the volume of air that the compressor can deliver at a specific pressure level. The CFM 185 air compressor typically delivers an impressive 185 CFM, making it suitable for a wide range of applications that require substantial air supply. This high CFM rating enables the compressor to power multiple tools simultaneously, effectively enhancing productivity on job sites.


    ...