barre de forage en alliage dur
Conclusion
Technologische Entwicklungen
Изготовитель песчаных насосов

Due to the machine's working environment being prone to intense vibrations and impacts, constantly observe the dynamics of various parts during operation. If you detect abnormal noise or other irregularities, shut down the machine immediately for inspection and repair before resuming operation. If hydraulic system connectors leak or components become loose, shut down the machine for adjustment and tightening. After ensuring everything is normal, you can resume operation. Before completing each shift, lower the hydraulic hammer to the lowest position and retract all other hydraulic cylinders to their shortest length. If moving a distance, keep the mast leaning backward. For the machine's components, accessories, and electrical equipment, perform regular inspections, especially the connections in the wiring of the motor. During operation, there should be designated personnel for guidance. The guide and the operator should check signals with each other before work and cooperate closely. At the start, use a bell or other methods to signal and inform surrounding personnel to move away. The machine should start at a low speed and gradually accelerate to high speed.
Conclusion
The use of wood mold or lost foam requires the mold to be consistent with the real thing, the appearance is smooth, and the yield and surface finish of the casting are improved, so as to reduce flash, burr and cold separation.
1. Regular Inspections Frequent checks for signs of wear, cracks, or deformation can help identify issues early on. Monitoring the condition of jaw plates allows for timely replacements before significant damage occurs.
(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.