top hammer vs down the hole


(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

...

1. Mining Industry In mining operations, heavy slurry pumps play a critical role in the extraction and processing of minerals. They are used to transport slurries containing ores, which can be heavily loaded with solids. These pumps facilitate the movement of material from the mining site to processing plants, significantly enhancing operational efficiency while reducing the risk of equipment damage due to the abrasive nature of mine slurries.


...

Es gibt zahlreiche Hersteller, die sich auf die Produktion von Sandpumpen spezialisiert haben. Diese Unternehmen zeichnen sich nicht nur durch ihre Produktqualität, sondern auch durch ihre Innovationskraft aus. Viele Hersteller setzen moderne Fertigungstechnologien ein, um ihre Pumpen leistungsfähiger und langlebiger zu machen. Dazu gehören computergestützte Designverfahren (CAD), präzise CNC-Bearbeitungstechniken und fortschrittliche Materialwissenschaften.


...