Understanding Directed Drilling Rods

Conclusion

3. Heavy-Duty or Construction Pumps These are specialized pumps designed for large-scale operations, such as construction sites. They can handle larger volumes of water and solids, making them ideal for dewatering trenches or excavations.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

2, according to the aperture is not the same, the drill can be divided into light drilling rig, medium drilling rig, heavy drilling rig.

The Basics of Mars’ Atmosphere

One of the notable advantages of submarine hammer drilling is its efficiency in penetrating tough materials. Traditional drilling methods may struggle with hard rock formations, often resulting in slower progress and increased operational costs. Hammer drilling wears less on the drill bit, ultimately reducing the frequency of replacements and downtime.

Self-priming slurry pump solutions leverage advanced technology, such as self-priming mechanisms, wear-resistant materials, and high-efficiency impellers. These innovative features enable the pumps to handle abrasive materials with ease, reducing wear and tear and ensuring long-lasting performance.

Safety Features

የሚኖረውን ጥበብ