The main components of submarine hammer drilling equipment include the drill rig, hammer, drill pipes, and the drill bit. The drill rig is often mounted on a surface vessel or a floating platform and is designed to support the excessive weight and dynamic forces encountered during drilling operations.

Cleaning method:
Fill the pump with water
Content introduction
Problem: pump does not water, pressure gauge and true empty meter pointer beat violently.

4. Lower Noise and Vibration Operational noise and vibration levels are generally lower with DTH hammers, contributing to a more environmentally friendly drilling process and improving working conditions for operators.

1. Offshore Oil and Gas Exploration In the oil and gas industry, submarine hammer drilling is crucial for the installation of subsea pipelines and wellheads. The ability to efficiently penetrate the seabed allows for the secure placement of infrastructure that can transport hydrocarbons from extraction points to processing facilities.

Die Herstellung von Sandpumpen ist ein dynamisches Feld, das kontinuierlichen Fortschritt und Anpassungsfähigkeit erfordert. Die Hersteller sind gefordert, innovative Lösungen anzubieten, die den steigenden Anforderungen der Industrie gerecht werden, während sie gleichzeitig effizient und kosteneffektiv arbeiten. Mit dem Fokus auf technologische Entwicklungen und Anpassungen an die Marktentwicklungen werden die Hersteller von Sandpumpen eine wichtige Rolle in der zukünftigen Entwicklung der Bau- und Bergbauindustrie spielen.

(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.

Cleaning method:
Fill the pump with water
Content introduction
Problem: pump does not water, pressure gauge and true empty meter pointer beat violently.

Construction Sector