Пуля на зубы


2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.

...
Пуля на зубы2025-08-15 05:37
379

The DTH hammer operates through compressed air, which is pumped through a series of valves and chambers within the hammer. When the air pressure builds up, it drives a piston that strikes the drill bit, creating a powerful force that breaks the material. This process continues in rapid succession, allowing the drill bit to penetrate the ground efficiently. The design of the DTH hammer allows for a larger drop height of the piston than traditional rotary drills, resulting in higher impact energy and better drilling performance.


...
Пуля на зубы2025-08-15 05:06
2213

A 20mm drill rod typically refers to a cylindrical tool made of high-strength steel, designed for use in drilling operations. Its 20mm diameter strikes a balance between robustness and manageability, allowing it to penetrate materials while maintaining sufficient structural integrity. The rod can be produced in various lengths, which can be tailored to the specific requirements of a drilling project. Additionally, many manufacturers offer drill rods with various coatings or treatments to enhance wear resistance and durability, making them suitable for use in harsh environments.


...
Пуля на зубы2025-08-15 04:48
1973