(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.

Natijada, burg'ulash vositalarini sotib olishda har bir tashkilot ehtiyojini batafsil o'rganishi va narxlarni boshlang'ich omil sifatida ko'rib chiqishi muhimdir. Ular o'z faoliyatlarida muvaffaqiyatga erishishlari uchun, yuqori sifatli vositalarni o'zlariga mos narxda tanlashlari zarur.

Automation is another key area of growth in downhole drilling technology. Automated systems and robotics can enhance operational efficiency by minimizing human error and reducing the need for personnel in hazardous environments. Smart drilling systems equipped with sensors can analyze real-time data to optimize drilling parameters dynamically, resulting in better productivity and cost savings.

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

Conclusion

Understanding Submarine Hammer Drilling

4. Reduced Costs Despite potentially higher upfront equipment costs, DTH drilling can lead to substantial savings over time. The efficiency and speed of the method mean lower labor costs and quicker project completion times. Furthermore, the reduced need for extensive maintenance and downtime enhances overall productivity.

Conclusion

The Basics of Mars’ Atmosphere

The main components of submarine hammer drilling equipment include the drill rig, hammer, drill pipes, and the drill bit. The drill rig is often mounted on a surface vessel or a floating platform and is designed to support the excessive weight and dynamic forces encountered during drilling operations.