fabricantes de tablero.
Advantages of Bullet Teeth
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
Additionally, the tools and technologies used on Mars will have to be adapted. For example, engines that rely on combustion would be less efficient in Mars’ thin atmosphere, requiring alternative propulsion methods. Moreover, the presence of carbon dioxide could be harnessed for in-situ resource utilization, converting CO2 into oxygen for breathing and fuel.
Advantages of DTH Hammer Drilling
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.