pompe d'aspiration de gravier
2. سهولة النقل تتميز الضواغط المحمولة بخفة وزنها وحجمها الصغير، مما يسهل نقلها من موقع لآخر. هذه الميزة تجعلها مثالية للاستخدام في مواقع العمل المتغيرة مثل مواقع البناء أو المشاريع الميدانية.
A jaw plate is a vital part of a jaw crusher. Typically, these plates are made of high-strength steel or manganese steel and are designed to withstand the immense pressure and force that occurs during crushing operations. Functionally, jaw plates serve as the primary point for the raw materials to be crushed. They work in tandem with the stationary jaw and the movable jaw, creating a V-shaped cavity that compresses materials to break them down into manageable sizes.
What Are 185% Compressors?
3. Brand and Quality
preço da máquina de perfuração

1.Downhole drilling machine: When drilling a downhole gun hole with a aperture less than 150 mm, in addition to the application of a rock drill, it can also be used to drill a small diameter of 80 ~ 150 mm. When drilling a gun hole with a diameter of less than 70 mm in coal or softer mineral rock, it is generally used to drill or air drill, driven by a motor (or air motor) to drill the drill pipe, and the rock (coal) chips drilled out are discharged through the spiral groove on the drill pipe.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.
2). Features:
1, the drill selects the motor through the high-performance reducer as the reverse power; Use cylinders for propulsion. The hydraulic system is eliminated, so the mechanical efficiency is high, the cost is low, and the performance is stable.2, with anti-card maintenance, when the drill is stuck, the motor is not easy to burn, the reducer is not easy to damage.
3, simple and easy to move, the weight of the drill machine is less than 500Kg, and can be broken down into three pieces, easy to move and put on the shelf.
4, the selection of rolling drag plate, the track is not easy to wear.
5, the drilling machine uses semi-automatic cloud dynamic disassembling drill pipe, high efficiency.