185 compresseurs d'air diesel
3. Toggle Mechanism
Furthermore, the dimensions of the 20mm drill rod provide a perfect balance, ensuring that it is neither too bulky nor too fragile. This balance allows for efficient drilling without excessive energy consumption. The weight of the rod also plays a crucial role in its transportation and handling, making it easier for workers to maneuver it on-site.
20mm drill rod

Slurry pump in the use of the process will find blockage, so how should we deal with this problem, many customers think that this is a more complex problem, but if the blockage problem is not handled well, it will cause damage to the equipment, which will also affect the efficiency of use, then slurry pump blockage problem we should pay special attention to it. So how to deal with the slurry pump blockage problem? The following part explains the treatment method of slurry pump blockage.
- Строительство Для работы пневматических инструментов, таких как молоты, гайковерты и вибрационные экскаваторы.
Applications of DTH Hammer Drilling
The reason:
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
Inlet valve is not open or has silted
Suction line resistance is too high or blocked
Suction height is too high
Moreover, the wear and tear of jaw plates can lead to decreased efficiency, increased downtime, and heightened operational costs. Regular monitoring and timely replacement of worn-out jaw plates are essential to maintain optimal performance and reduce the risk of equipment failure.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.