Safety Features

CFM คืออะไร?

(1) When using the drilling rig to drill, the driver should be placed in the drilling position, so that the front end is against the rock, and the distribution should be careful to let the drilling rig move forward, so that the drill bit touches the rock; When opening the hole, first quietly let the drilling rig drive, when the drill rod is in place in the rock, it is allocated to the full open position.
(2) Before starting the drilling rig, check whether the charging pressure of the accumulator is normal; Check whether the scouring water pressure and the lubricating air pressure can be; Check whether there is sufficient lubricating oil in the lubricator, and whether the oil supply is appropriate; Check the reverse tendency of the oil pump motor. (3) If the drilling rig cannot open the hole smoothly, it should first assign the rock drill to retreat, and then let the rock drill move forward to open the hole from the beginning.
(4) When replacing the drill bit, the drill bit should be gently pressed against the rock, so that the motor of the drill can be reversed to complete the sensitive unloading head.
(5) The inspection of hydraulic components can only be prevented under the condition of pole cleaning, and after the connecting tissue is removed, it must be quickly plugged with the cleaning tightly matched plug. Before the repaired rock drill is used from scratch, it is necessary to circulate the hydraulic oil into the oil circuit to wash the components of the hydraulic system.
(6) The oil level and oil supply of the lubricator should be checked regularly; The gear with reverse structure is regularly filled with high-temperature grease; Check the oil level in the lubricating oil tank regularly and remove the dirt in the oil tank

1. Precision and Control One of the most significant advantages of a fractional head hammer is the precision it provides. The separated sections of the hammer's head allow the user to target specific areas without affecting surrounding materials. This is particularly useful in tasks requiring delicate handling, such as woodworking or metal fabrication, where subtlety is paramount.

Quality Assurance

Cleaning method:
Fill the pump with water
Open the inlet door and clean the clogged part of the pipeline
Plug the leak area and check whether the packing is wet or compressed

Despite their crucial role, slurry pumps face several challenges. Abrasive materials can cause significant wear and tear, leading to frequent maintenance needs and potential downtime. This not only affects operational efficiency but can also lead to increased operational costs. Therefore, mining companies are continually seeking innovations in pump technology to enhance durability and efficiency.

In conclusion, manganese plays a pivotal role in the manufacturing of jaw plates for crushers in the mining industry. Its unique properties enhance the performance and longevity of these critical components, thereby contributing to the efficiency and cost-effectiveness of mining operations. As the industry evolves, ongoing innovations in material science promise to further improve the effectiveness of manganese jaw plates, ensuring they remain a vital element in the world of mining and crushing.

디젤 공기 압축기의 장점