Conclusion

(1) If the horizontal slurry pump causes a blockage of solid hard deposits in the volute, measures can be taken to remove the blockage.
(2) If the shaft is different from the stuffing box axis, it is mainly due to processing errors and incorrect installation. Then pay attention to check whether the installation is correct after installation. If the sealing water ring is badly worn, a new water ring needs to be replaced. If the sealing water pipe is blocked, the sealing water cannot enter the middle of the packing, resulting in rapid wear of the packing, resulting in material leakage, you should dredge the blocked water pipe and keep the sealing water clean.
(3) If the impeller or the inlet and outlet water pipe is blocked, the impeller or pipe can be cleaned, and if the impeller is seriously worn, it should be replaced. If the filler mouth leaks, press the filler. If the conveying height is too high or the tube loss resistance is too large, the conveying height should be reduced or the resistance reduced.

1. Smooth Jaw Plates These plates are flat and uniformly shaped, providing consistent crushing performance for softer materials. They are ideal for producing a finer product and are commonly used in applications where the end product requires a smooth finish.

The main components of submarine hammer drilling equipment include the drill rig, hammer, drill pipes, and the drill bit. The drill rig is often mounted on a surface vessel or a floating platform and is designed to support the excessive weight and dynamic forces encountered during drilling operations.

Key Features of the 185 CFM Diesel Air Compressor

The following matters should be paid attention to during the use of the drilling rig, and the correct use can bring greater benefits

- البناء تستخدم في تشغيل الأدوات الهوائية مثل المثاقب المفاجئة والمفكات، مما يؤدي إلى زيادة كفاءة العمل.